FMR2002 ...

The Latest Innovation In Fastener Technology!

The FMR2002 product is available as a Front-Mount Retainer/Standoff or as a Front-Mount Retainer Assembly. Click here for ordering information for the Front-Mount Retainer/Standoff or Click here for ordering information for the Front-Mount Retainer Assembly

WHAT IS THE FMR2002?

The FMR2002 is a new patent-pending multipurpose fastener developed by ASM that is available externally/internally threaded for use as a retainer assembly (Fig. A) or threaded standoff (Fig. C) - plus it can be ordered without internal threads for use as a clear-hole standoff/spacer (Fig. B).
The FMR2002 is completely installed from the front of a panel due to its unique external threaded design – you simply drill, tap, and install with a standard socket or open ended wrench.
The FMR2002 is produced hex-headed and is available in brass, steel, or stainless steel.

TAKE ADVANTAGE OF A SPECIAL LIMITED TIME OFFER...

Accurate Screw Machine is so confident that you will see the benefits of this innovative product that WE WILL PRODUCE FREE SAMPLES (to your specifications) of the FMR2002 to try on your next project.

Call our Sales Department today at 1-888-208-2008 for complete details.

HOW DOES THE FMR2002 SAVE TIME AND MONEY?

Reduces Panel Assembly Time up to 20% due to the unique completely front mount (or single-sided) installation process.
Cuts Production Setup Costs because there is no need for anvil/punch sets or equipment, such as an arbor press, punch press, or drill press.
Eliminates Product Rejection Rates on bent, cracked, or bulging panels because, unlike traditional swaged or flared products that require a pressing force for installation, the FMR2002 simply screws tightly into place.
Allows Onsite Product Repair due to its external threaded design and installation, which enables the FMR2002 to be easily removed and reused.

THE FMR2002 IS AN EXCELLENT ALTERNATIVE TO EXISTING FLARED AND SWAGE STANDOFF PRODUCTS ...

In Applications With Restricted Installation Space

The FMR2002 completely installs from the front (or a single-side) of a panel using a standard socket or open ended wrench (Fig. C). This dramatically reduces clearance and accessibility constraints normally associated with traditional retainer/standoff products that require installation using a press, anvil, or punch (Fig. D).

In Applications With Panel Edge Distortion Concerns

The FMR2002 can be installed much closer to the edge of a panel (Fig. E) than a traditional retainer/standoff without concerns about panel distortion. This is possible because the shank portion of the FMR2002 is screwed in rather than pressed, which lessens the force and stress applied to the panel material, eliminating any bulging or cracking issues (Fig. F).